Timeline
2007-09-11:
- 18:30 Ticket #219 (Ecosim Vulnerabilities- set vulnerabilities function only allows 1 column ...) created by
- This would me much more useful if you could select multiple columns at a …
- 18:22 Ticket #218 (Ecosim FF- seasonal shapes 1-3 have long-term status) created by
- A little counter-intuitive....FF 1,2, and 3 have the ability to be long …
- 17:41 Ticket #217 (Two missing options on Biomass form - Fleet dynamics and Network analysis) created by
- Need buttons/checkboxes to invoke: 1. Fleet/Effort? dynamics module 2. …
- 17:25 Ticket #216 (FF - options- shape- not working properly) created by
- None of these shapes are working properly. I either get the whole screen …
- 17:08 Ticket #215 (Ecosim FF values- not saving changes) created by
- If you create a new FF and go to values instead of drawing, and type in …
- 16:35 Ticket #214 (Forcing function numbers not easily available for hatchery and nutrient ...) created by
- Users need to know what numbers have been allocated to forcing functions …
- 15:41 Ticket #213 (Status bar does not reflect new name of models `saved as`) created by
- If you Save a model under a new name using Save As, the status bar still …
- 15:32 Ticket #212 (FF duplicate button not working correctly) created by
- I can create new FF's, but when I try to duplicate them, I get the …
- 15:03 Ticket #210 (Forcing functions need numbers and names) created by
- When you apply a forcing function to a group, the cell shows a number ex. …
- 14:58 Ticket #209 (Ecosim- parameters-Nutrient loading forcing # needs corresponding FF #) created by
- In the Ecosim parameters tab- the nutrient loading forcing number can be …
- 14:39 Ticket #208 (Cannot open previously converted EwE 6 models) created by
- Models such as georgia straight, and Tampa Bay, and Antarctic Peninsula …
- 14:32 Ticket #207 (Windows menu - 'close all 'clears Navigator window) created by
- On the Windows menu - 'close all'clears the Navigator window. You can't …
2007-09-10:
- 16:31 Ticket #206 (Forcing function form - values box causes crash when you hit ok) created by
- The Values dialogue box on FF form causes crash when you hit ok `index was …
2007-09-09:
- 21:55 Ticket #204 (Edit regions - cannot change number of regions) created by
- the Edit regions form has a default number of 0 regions and you cannot …
- 14:22 Ticket #203 (Edit MPAs form not updating properly) created by
- Edit MPAs dialogue box: Open Edit MPAs dialogue box Tick some boxes …
- 14:11 Ticket #202 (Clicking basemap causes crash) created by
- The Basemap form shows a blank green box where I think the map should be. …
- 14:07 Ticket #201 (New Ecospace scenario fails to load) created by
- I created a new Ecospace scenario in Tampa Bay and defined some habitats. …
2007-09-07:
- 20:19 Ticket #200 (Several problems with Policy search) created by
- 1. Typo on the word Portfolio it is spelt Portforlio on the form. 2. …
- 08:13 Ticket #199 (Time Series apply interface must support Datasets) created by
- The Apply dialog must group time series by datasets, and the user should …
- 07:35 Ticket #198 (Remarks panel retains its content when closing a model. Editing this ...) created by
- To reproduce: - Open a model - Select a cell with a remark - Dock lock …
2007-09-06:
- 17:12 Ticket #197 (Edit description of Ecosim scenarios) created by
- When opening an Ecosim scenario one can see the remark = Description. It …
- 16:00 Ticket #196 (Notes/bugs with Monte Carlo form) created by
- 1. Why does the Apply best fits button on the Monte Carlo form jump the …
- 14:48 Ticket #195 (Error loading group info) created by
- When reading a previously converted (functioning I believe) ewe6 file, I …
- 14:29 Ticket #194 (Error converting database) created by
- Trying to convert from ewe5 database gives an error in cEwEdatabase. model …
- 13:02 Ticket #193 (Fishing rate sketchpad stops drawing while the graph is re-sizing) created by
- The fishing rate sketchpad stops drawing while the graph is re-sizing - …
2007-09-04:
- 22:53 Ticket #192 (Check boxes don't work on Show All Fits form) created by
- The check boxes don't work on Show All Fits form (on the side of the form …
2007-09-03:
- 16:54 Ticket #191 (Deleting a newly added time series causes Tampa Bay model to crash) created by
- Tampa Bay model freshly imported from old Ecopath database. Added a new …
- 15:26 Ticket #190 (Values dialogue box on Time Series form) created by
- 1. Is it possible for the down arrow to work when a cell is active so the …
- 12:02 Ticket #189 (Ecosim Vulnerabilities> set button does not work) created by
- I am not sure if you know this, I cannot enter in a value to set the …
2007-08-31:
- 19:59 Ticket #188 (Reset F's in Eocism output not automatically updating) created by
- If you draw in a mortality sketch, and click reset F's, the screen does …
- 19:44 Ticket #187 (Group info> max relative feeding time changed from default not correct in ...) created by
- Model : antarctic adjusted EE If I change the default form 2 to 0.5 for …
- 19:14 Ticket #186 (Ecosim parameters > proportion of base nutrients not making changes to ...) created by
- Ok I am going off of what version 5 does when I change the parameters. In …
- 18:50 Ticket #185 (changing ecosim run time does not automatically update) created by
- version 18 When adjusting the duration of the simulation, it is necessary …
- 14:59 Ticket #184 (Apply egg production form crashes model) created by
- Apply egg production. Tampa Bay model. Attempt to click in cells for …
- 10:41 Ticket #183 (Electivity not being calculated for detritus) created by
- All other groups have correct values, except for detritus. Model Lab 5 …
- 09:52 Ticket #182 (copying cells into excell> -9999 values) created by
- If you copy the basic input or the parameterization cells into excell, the …
2007-08-30:
- 16:58 Ticket #181 (Clear All on Apply Forcing function form causes software to hang) created by
- Clear All on Apply Forcing function form causes software to hang - …
2007-08-29:
- 18:22 Ticket #179 (Mortality coefficients> net migration rate- negative values not being ...) created by
- Version 18 The rates are not being calculated/ displayed correctly- I am …
- 18:06 Ticket #178 (Egg production form - can't add) created by
- Attempt to Remove a newly-added shape resulted in Ecosim failed to save …
- 17:58 Ticket #177 (Mortality Coefficients> Predation mortality rate- extreme values not ...) created by
- Under the mortality coefficients tab there are some extreme values that …
- 17:36 Ticket #176 (Diet composition changes not saving to core) created by
- Sorry- this worked in the old (17) version. This is version 18, changes I …
- 17:35 Ticket #175 (Apply mediation and forcing function form - Clear all and Set all) created by
- Clear all and Set all on the 'Apply mediation and orcing function' form …
- 16:09 Ticket #174 (Status window gives Ecopath run successful message when model is not ...) created by
- Generic 22 model. Opened model Summed diet composition to 1 Clicked …
- 14:59 Ticket #173 (Several problems with forcing function form) created by
- 1. Attempts to load a forcing shape from the Options menu on the form …
- 11:39 Ticket #172 (Attempt to open Ocean Test model from old Ecopath mdb caused crash) created by
- I tried extracting the Ocean Test Model from the old Ecopath.mdb (with …
- 10:30 Ticket #171 (Option to Save model not always available) created by
- I just made a change to the diet matrix in Generic 22 model so that I can …
2007-08-28:
- 16:44 Ticket #170 (Time Series - Icon does not appear when you `right click>apply` on ...) created by
- Bug: Go to time series. Right click>apply` on time series. …
- 14:46 Ticket #169 (Network analysis: Summary of flow data node in wrong place) created by
- The Summary of flow data node should be under the Flows and Biomasses …
- 14:35 Ticket #168 (Cannot add more than one Egg production shapes) created by
- On the Egg production form. Clicking Add... causes a prompt to save the …
- 14:32 Ticket #167 (Several bugs with Mediation form) created by
- 1. Clicking the Add... or Duplicate buttons in Mediation opens a prompt to …
- 14:13 Ticket #166 (Ecopath>output>fishery>value missing output data columns) created by
- this interface is missing 2 columns: one for non-market value, and the …
- 13:46 Ticket #165 (Ecopath unable to run with negative key index values) created by
- Could be related to bug 165, If I add an immigration value into the other …
2007-08-25:
- 14:14 Ticket #164 (Other production- cannot enter negative numbers for biomass accumulation) created by
- I can enter positive numbers and get the desired effect, but I cannot …
- 12:44 Ticket #163 (Commenting Cells in Basic input- comments not automatically updating) created by
- Comments- Comments are not showing up for cells that already contain a …
- 11:38 Ticket #162 (Edit multistanza groups- interface closes when you click enter) created by
- Minor problem with exiting cells. Clicking enter after editing a cell such …
- 11:35 Ticket #161 (Creating/ adding multistanza groups- cannot add more once created) created by
- Must add/create all multistanza groups at the same time or else changes do …
- 09:37 Ticket #160 (Editing groups- editing multistanza ages- inverted numbers) created by
- Sorry if this is a repeat- I cannot seem to find it, but it is still not …
- 07:57 Ticket #159 (Options- group color not changing in Ecosim) created by
- So assuming I am using this correctly. . . I loaded an existing model (lab …
2007-08-23:
- 15:58 Ticket #158 (Tree Node cannot have same name as branch node) created by
- Click on Ecospace>Input>Fishery node, the result will change the tree …
2007-08-22:
- 09:37 Ticket #157 (Ecopath outputs > Fishery > Value does not display non-market value info) created by
- The old EwE calculates a Non-market value for groups where a Non-market …
2007-08-19:
- 12:42 Ticket #156 (Pasting into a grid without cells selected will crash EwE) created by
- To reproduce: 1. Click a non-empy cell 2. Copy it's value (Ctrl+C) 3. …
2007-08-16:
- 18:41 Ticket #154 (Ecosim fails to save) created by
- Ok this one is kind of my fault, but still crashes the system... If I am …
- 18:38 Ticket #153 (Cannot create new scenarios in Ecosim) created by
- If I remember correctly this used to work. I have tried this in version 16 …
- 18:28 Ticket #152 (Deleting groups from time series tab- jumps to another interface) created by
- Once I have some data in the file (which was attached to a scenario when I …
- 18:24 Ticket #151 (time series- options- cannot change options in graphs) created by
- If I try to play around with things (as I often do) I clicked on the shape …
- 18:17 Ticket #150 (reading 0s in time series instead of missing values) created by
- So for the time-series data, I think one big difference is that version 6 …
- 18:13 Ticket #149 (Ecosim biomass output altered after loading time series.) created by
- Ok this one is a little confusing. I am using my Antarctic model for …
- 18:08 Ticket #148 (parameterization for groups with EE=0) created by
- This is interesting if I import a model with marine mammal groups where …
- 18:05 Ticket #147 (Multistanza graph not correct) created by
- When I edit the multistanza group (cod)[lab4 aug 16 created]. It …
Note: See TracTimeline
for information about the timeline view.
