Timeline
2011-07-05:
- 17:54 Ticket #579 (Run Ecosim plot) closed by
- fixed
- 17:47 Ticket #1015 (Ecospace re-size map to smaller fails) closed by
- fixed: No longer happens
2011-07-04:
- 13:08 Ticket #1019 (Ecospace scenarios take too long to save) closed by
- fixed: Ok, dunnit. Maps are saved to strings with a tad of smartness: * Maps …
- 13:03 Ticket #1019 (Ecospace scenarios take too long to save) created by
- Right now, map info is stored in a row for each cell. Saving this …
- 13:00 Ticket #1010 (Pedigree level changes do not stick) closed by
- fixed
- 10:38 Ticket #1018 (Migration months-location do not import from 5) created by
- Migration maps in EwE5 (cell location of group in a month) do not import …
2011-06-30:
- 15:36 Ticket #1017 (Ecosim parameters "Nutrient proportion of free nutrients" should not be a ...) created by
- 'Nutrient proportion of free nutrients' in the Ecosim parameters should be …
- 11:35 Ticket #1016 (Ecospace Save Scenario as... fails) created by
- Try to save an existing Ecospace scenario via the Save As... I think …
- 11:33 Ticket #1015 (Ecospace re-size map to smaller fails) created by
- In Ecospace make a large map then save and re-open it. Re-size the map …
2011-06-28:
- 18:17 Ticket #1013 (Import process should warn for model overwrites) closed by
- fixed: Done
- 13:05 Ticket #1014 (Increasing Ecospace map size may give land values in new cells) closed by
- fixed: This occurs for databases where the advection database fields were added …
- 13:01 Ticket #1014 (Increasing Ecospace map size may give land values in new cells) created by
- Extend a map by a certain number of rows and/or cols, and the map may show …
- 10:56 Ticket #1013 (Import process should warn for model overwrites) created by
- The import interface should warn when a target model will be overwritten. …
2011-06-24:
- 08:30 Ticket #1012 (Grid copy/paste does not work well) closed by
- fixed: Fixed
- 07:52 Ticket #1012 (Grid copy/paste does not work well) created by
- if I copy the data you see in the attached spreadsheet, the column PB does …
2011-06-22:
- 18:58 Ticket #1011 (Relative and Absolute biomass time series do not work well together) created by
- Here's a weird behavior using EwE6.2. Read in the (zip) lionfish model; …
2011-06-21:
- 22:20 Ticket #1010 (Pedigree level changes do not stick) created by
- We have some issues with the model .. and pedigree. Cannot get the …
- 14:46 WikiStart edited by
- (diff)
- 14:42 BasicTutorials edited by
- (diff)
- 14:40 GettingStartedWithSources created by
- 14:39 WikiStart edited by
- (diff)
- 14:36 BasicTutorials edited by
- (diff)
2011-06-20:
- 18:40 Milestone Ecopath 6: release 6.2 completed
- Release of EwE6 focused on memory usage and stability
2011-06-19:
- 11:20 EwEugFrontPage edited by
- Comment added. (diff)
- 11:14 EwEugFrontPage edited by
- (diff)
2011-06-18:
- 14:49 Ticket #1009 (Presentation mode and other shortcut keys not always working) closed by
- fixed
- 14:49 Ticket #1009 (Presentation mode and other shortcut keys not always working) created by
- The main application window needs to have focus for F11 and ESC to toggle …
2011-06-17:
- 16:17 Ticket #1008 (Ecospace migration starts at February) closed by
- fixed: Fixed!
- 16:12 Ticket #1008 (Ecospace migration starts at February) created by
- Edit migration and the month box starts at February, not January
- 12:03 Ticket #1007 (Add forum post notifications to EwE) created by
- Add an option to the EwE interface that notifies users when new forum …
- 11:43 Ticket #1006 (Ecotracer field name change) closed by
- fixed: Done
- 11:21 Ticket #1006 (Ecotracer field name change) created by
- Regarding: Ecotracer Window: Ecotracer Input Relabel field header …
- 11:19 Ticket #1005 (Ecotracer output graph should not plot cumulative data) closed by
- fixed
- 11:12 Ticket #1005 (Ecotracer output graph should not plot cumulative data) created by
- In Beta 6.2 ecotracer outputs are shown as cumulative which makes no …
2011-06-16:
- 17:07 Ticket #1004 (Ecospace plot y-axis should range from .1 to 10) closed by
- fixed: Done
- 17:06 Ticket #1004 (Ecospace plot y-axis should range from .1 to 10) created by
- just check 5
2011-06-15:
- 13:03 Ticket #1003 (remarks in EwE) closed by
- fixed: The remarks panel was programmed to apply its content on [ENTER]. This is …
- 12:58 Ticket #1003 (remarks in EwE) created by
- trying to include remarks in a cell (basic input). It use to be that we …
2011-06-14:
- 18:54 Ticket #1002 (Add emergy calculations) created by
- it might be useful for my purposes to modify the program to allow the …
- 18:41 Ticket #1001 (Paste in 'Define ...' grids does not work well) closed by
- fixed: The problem occurred when pasting in cells that contained names that were …
- 10:35 Ticket #1001 (Paste in 'Define ...' grids does not work well) created by
- Grid clipboard paste does not work in the "Define .." interfaces that try …
2011-06-13:
- 16:18 Ticket #1000 ('Enter' should not be linked to 'OK' in complex interfaces) closed by
- fixed
- 15:14 Ticket #950 (Ecospace 'show MPA' option should also be available when plotting effort) closed by
- fixed
- 14:58 Ticket #1000 ('Enter' should not be linked to 'OK' in complex interfaces) created by
- Standard Windows user interface guidelines state that 'Enter' presses …
- 13:06 BasicTutorials edited by
- (diff)
- 10:10 EwEugVulnerabilitiesInEcosim edited by
- (diff)
- 10:09 EwEugEcosimBasics edited by
- (diff)
- 10:01 Ticket #999 (Do not advance to next cell if an edit operation failed) closed by
- fixed
- 09:57 EwEugAbout edited by
- Comment added. (diff)
- 09:57 EwEugAbout edited by
- (diff)
- 09:48 HowToAddCommentsToManual edited by
- Comment added. (diff)
- 09:48 HowToAddCommentsToManual edited by
- (diff)
- 09:47 HowToAddCommentsToManual edited by
- Comment added. (diff)
- 09:47 HowToAddCommentsToManual edited by
- (diff)
- 09:05 Ticket #999 (Do not advance to next cell if an edit operation failed) created by
- I am entering a new model and I am not very familiar with the interface so …
2011-06-12:
- 18:45 Ticket #995 (Fit to time series complains, EwE closes after creating new Ecosim ...) closed by
- fixed: Additionally, the UI did not clean up well, which caused it not to be able …
- 18:45 Ticket #997 (Fit to time series form crash when saving new scenario after anomaly ...) closed by
- duplicate: Duplicate of #995
- 18:24 Ticket #996 (Saving Ecosim under a new scenario does not retain Applied FF) closed by
- fixed: Fixed
- 13:46 Ticket #998 (Ecosim Quota does not save for new scenarios) closed by
- fixed
- 12:52 Ticket #998 (Ecosim Quota does not save for new scenarios) created by
- When saving an Ecosim scenario under a new name, MSE quota information is …
- 12:39 Ticket #997 (Fit to time series form crash when saving new scenario after anomaly ...) created by
- Run an anomaly search and save the Ecosim scenario to a new name. After an …
2011-06-10:
- 20:41 Ticket #996 (Saving Ecosim under a new scenario does not retain Applied FF) created by
- Saving an Ecosim scenario under a new name destroys all existing applied …
- 15:17 Ticket #443 (Changing values) reopened by
- Fixed for Stanza start ages, which can be set from Define Groups and Edit …
2011-06-09:
- 09:41 Ticket #995 (Fit to time series complains, EwE closes after creating new Ecosim ...) created by
- I fitted the model and then saved the Ecosim scenario (save scenario …
- 08:25 HowToAddCommentsToManual created by
- 08:24 UsersGuide edited by
- (diff)
2011-06-08:
- 20:47 Ticket #994 (Cannot Delete Groups in Ecopath 6.2 beta) closed by
- fixed: Fixed, bug was caused by a malformed database foreign key constraint
- 12:17 Ticket #994 (Cannot Delete Groups in Ecopath 6.2 beta) created by
- I am trying to delete a group in Ecopath 6.2 beta, when I click OK the …
- 11:22 Ticket #993 (Ecopath 'Define Pedigree' interface is instable) closed by
- fixed
- 11:11 Ticket #993 (Ecopath 'Define Pedigree' interface is instable) created by
- The 'Define Pedigree' interface disappears occasionally after responding …
2011-06-07:
- 17:25 Ticket #991 (Multiple runs should not show cumulative data) closed by
- fixed: Fixed
- 17:24 Ticket #992 (Multiple Runs option should be more accessible) closed by
- fixed
- 15:35 Ticket #992 (Multiple Runs option should be more accessible) created by
- The Run Ecosim > Multiple runs option is buried in the options menu. It is …
- 15:32 Ticket #991 (Multiple runs should not show cumulative data) created by
- In Run Ecosim, the combination of 'multiple runs' and 'cumulative data' …
- 15:29 Ticket #989 (Run Ecosim graph tooltips are confusing) closed by
- fixed
- 13:24 Ticket #990 (Ecosim Plots multiple runs) created by
- When Multiple run are selected on the Run Ecosim form you could also view …
- 12:15 Ticket #989 (Run Ecosim graph tooltips are confusing) created by
- The tool tip boxes that show when the cursor hovers over a line in the Run …
2011-06-06:
- 17:22 Ticket #579 (Run Ecosim plot) reopened by
- Explore mode is not clear
- 10:58 Ticket #984 (Ecosim screen vs results mismatch) closed by
- not an issue: The values in 'Ecosim results' tab are the average over the period defined …
2011-06-05:
- 12:58 Ticket #988 (Need status feedback for automatic updates process) closed by
- fixed
- 12:57 Ticket #988 (Need status feedback for automatic updates process) created by
- There is no feedback for the status of automatic updates. It would be good …
- 10:06 Ticket #987 (Automatic updates need administrative privileges) closed by
- fixed
- 09:31 Ticket #987 (Automatic updates need administrative privileges) created by
- Under Windows Vista / 7 UAC, a program can only write to its program …
Note: See TracTimeline
for information about the timeline view.
