Changes between Version 8 and Version 9 of EwEHabitatForagingCapacity

Timestamp:

2013-01-30 13:53:47 (11 years ago)

Author:

jeroens

Comment:

--

EwEHabitatForagingCapacity

@@ -12 +12 @@
 
 [[Image(habcab_use_fig2.png)]]
+
 Figure 2 - Define environmental input layers
 
@@ -18 +19 @@
 === 2.     Provide map values ===
 Once the layers have been defined you can enter values in the environmental input layers (Figure 3)
+
 [[Image(habcab_use_fig3.png)]]
+
 Figure 3 - Populate environmental input layers
 
 === 3.     Define environmental responses ===
 Functional groups respond to the environmental drivers via a mediation-like structure. You will need to define these curves via ''Navigation Tree > Ecospace > Input > Habitat based foraging''.
+
 [[Image(habcab_use_fig4.png)]]
+
 Figure 4 - Foraging response configuration form
 
@@ -40 +45 @@
 
 This brings up the ‘foraging area response to input maps’ interface (Figure 5) for a single response function.
+
 [[Image(habcab_use_fig5.png)]]
+
 Figure 5 - Foraging area response interface
 
@@ -55 +62 @@
 === 5. Run ===
 Check that capacity calculations do use the capacity model in the Ecospace parameters form (Figure 6)
+
 [[Image(habcab_use_fig6.png)]]
+
 Figure 6 - Ecospace parameters to check for capacity
 
 The resulting capacity map can be viewed in the Ecospace map
+
 [[Image(habcab_use_fig7.png)]]
+
 Figure 7 - Computed capacity